Model 1 – from £1,250.00
Model 1 is our entry level loudspeaker system.
A two-way design, incorporating a 5.25″ woven cone diaphragm on a phase plug design, partnered with a 25 mm silk soft dome tweeter.
Utilizing the latest innovations in basketless bass system design to eliminate all the usual, but unwanted resonances generated by the common basket systems. Whether cast or press steel basket design, makes no significant differences to the fundamental problems.
Basketless, coupled with our ATIM © 2012 (Acoustically Transparent Invisible Mass) port technology, gives a superb tight bass reproduction. Designed to be simply as even, crisp and tuneful as possible.
Sizes: 19 cm (Width) x 28 cm (Depth) x 30 cm (Height)
Model 1 shown above with Sapele veneer
KEY FEATURES
* ATIM © 2012 (Acoustically Transparent Invisible Mass) port technology
* Basketless design so no unwanted vibration reaches your ear
*Suspended bass driver fixings specifically designed to eliminate cabinet vibrations reaching the woven diaphragm
*Easy to drive impedance loads with excellent sensitivity
*All systems internally wired with Atlas OFC speaker cable
Model 2 shown below in Cherry veneer.
Model 2 – from £1,400.00
Model 2 is based on the same design philosophy as the model 1, but with increased sensitivity due to the larger size bass unit.
The Model 2 is capable of astonishingly realistic music reproduction at suitable sound pressure levels, when driven by amplifiers of as little as 20 watts per channel RMS.
Sizes : 21 cm (Width) x 27 cm (Depth) x 33.5 cm (Height)
KEY FEATURES
* ATIM © 2012 (Acoustically Transparent Invisible Mass) port technology
* Basketless design to prevent unwanted vibration reaching your ear
*Suspended bass driver fixings specifically designed to eliminate cabinet vibrations reaching the woven diaphragm
*Easy to drive impedance loads with excellent sensitivity
*All systems internally wired with Atlas OFC speaker cable
Model 3 shown below in Cherry veneer.
Model 3 – from £2,400.00
The Model 3 is our first floor stander. Designed around the Allison 2.5 bass/room loading system. This technique is utilized in conjunction with our basketless driver design and the truly innovative ATIM © 2012 (Acoustically Transparent Invisible Mass) port technology. Producing deep clean articulate bass, with lower distortion in the mid-band than the Model 2s.
Happy listening.
Sizes: 21 cm (Width) x 27 cm (Depth) x 87 cm (Height
KEY FEATURES
*ATIM © 2012 (Acoustically Transparent Invisible Mass) port technology
*Basketless design to prevent unwanted vibration reaching your ear
*Suspended bass driver fixings specifically designed to eliminate cabinet vibrations reaching the woven diaphragm
*Easy to drive impedance loads with excellent sensitivity
*All systems wired with Atlas OFC speaker cable
As all products are hand made, please check availability of finishes.